BKXMV - S-110 AMASTEEL SHOT AMABRASIVE
- MSDS: BKXMV
- Manufacturer: ERVIN INDUSTRIES INC
- Product Name: S-110 AMASTEEL SHOT AMABRASIVE
- National Stock Number: 5350-00F018252
Product Identification
Product ID:S-110 AMASTEEL SHOT AMABRASIVE
MSDS Date:02/10/1989
FSC:5350
NIIN:00F018252
MSDS Number: BKXMV
Responsible Party
ANN ARBOR, MI 48108-2217
Emergency Phone: (313) 769-4600
Info Phone: (313) 769-4600
Preparer: DAVID A. HALE
Cage: 55807
Contractor
Telephone: 313-769-4600
Cage: 55807
Ingredients
MANGANESE (SARA III)
CAS: 7439-96-5
RTECS: OO9275000
Fraction By Weight: 0.5-1.3%
OSHA PEL (C) 5 MG/M3 DUST
ACGIH TLV: 5 MG/M3 DUST 9293
SILICON
CAS: 7440-21-3
RTECS: VW0400000
Fraction By Weight: 0.3-1.2%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
IRON
CAS: 7439-89-6
RTECS: NO4565500
Fraction By Weight: >96%
OSHA PEL 10 MG/CUM
ACGIH TLV: 5 MG/CUM
GRAPHITE, SYNTHETIC
CAS: 7440-44-0
RTECS: FF5250100
Fraction By Weight: 0.8-1.3%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 2 MG/M3 TDUST; 9293
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: MANGANESE DUST OR FUME CAN
CAUSE METAL FUME FEVER & NOSE IRRITATION. INGESTION: MANGANESE
POISONING & MOUTH IRRITATION. EYES: IRRITATION CAUSED BY SHOT,
GRIT, OR DUST PARTICLES.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: MANGANESE DUST OR FUME CAN CAUSE
METAL FUME FEVER OR NOSE IRRITATION. EYES: IRRITATION CAUSED BY
SHOT, GRIT, OR DUST PARTICLES. INGESTION: MANGANESE POISONING OR
MOUTH IRRITATION.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH W/WATER TO
REMOVE ANY REMAINING PARTICLES. INGESTION: OBTAIN MEDICAL ATTENTION
IN ALL CASES.
Fire Fighting
Extinguishing Media:DRY CHEMICALS OR SAND TO EXCLUDE AIR.
Fire Fighting Procedures:CAST STEEL SHOT & GRIT WILL NOT BURN OR
EXPLODE.
Unusual Fire/Explosion Hazard:A MILD FIRE OR EXPLOSION HAZARD SITUATION
MAY BE CREATED DUE TO THE FINE DUST THAT MAY RESULT FROM USE.
AUTOIGNITION TEMP: (SOLID IRON EXPOSED TO OXYGEN) 1706F.
Accidental Release
Spill Release Procedures:SPILLS & LEAKS ON FLOOR CAN CREATE HAZARDOUS
WALKING CONDITIONS. WEAR PROTECTIVE EQUIPMENT. RECLAIM FOR REUSE.
Handling
Handling and Storage Precautions:KEEP DRY TO REDUCE RUSTING. OBSERVE
MAXIMUM FLOOR LOADING LIMITATIONS. SHOT/GRIT BREAKS DOWN INTO
PROGRESSIVELY SMALLER PARTICLES DURING NORMAL USE.
Other Precautions:AVOID CONTACT W/EYES.
Exposure Controls
Respiratory Protection:IF THE DUST CREATED IS >TLV, WEAR NIOSH APPROVED
RESPIRATOR.
Ventilation:GENERAL OR LOCAL EXHAUST TO KEEP
Other Protective Equipment:AS REQUIRED
Supplemental Safety and Health
PERCENT SOLID BY WT: 100%
Chemical Properties
Boiling Pt:B.P. Text:5162-5702F
Melt/Freeze Pt:M.P/F.P Text:2500-2701F
Spec Gravity:>7.6
Appearance and Odor:NEAR SPHERICAL OR ANGULAR PARTICLES W/NO ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:SHOT & GRIT WILL BREAK DOWN INTO
PROGRESSIVELY SMALLER PARTICLES DURING NORMAL USE.
Disposal
Waste Disposal Methods:DISPOSE SHOT/GRIT AS NON-HAZARDOUS SOLID WASTE.
COLLECTED DUST FROM BLAST CLEANING/SHOT PEENING OPERATIONS CONTAINS
CONTAMINANTS FROM THE SURFACES. PROCESS AS HAZARDOUS WASTE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.